Click to zoom
Full-Body Red Light Therapy Bed
Lie down, close the canopy, and let uniform 660nm and 850nm light reach the entire body in a single 15-minute session. Marcus Bath's flagship red light system — built for luxury homes, resort spas and commercial wellness centres.
The Fastest Way to a Full-Body Session
The MB-RL01 is the format serious facilities choose. Where a panel treats one side at a time, the therapy bed surrounds the body with light from an upper canopy and a lower bed simultaneously — so a complete session takes minutes, not a rotation of positions.
Every MB-RL01 is built around dual-wavelength LED arrays: 660nm deep red for the surface layers of the skin, and 850nm near-infrared for deeper muscle and joint tissue. Medical-grade chips, an aluminium heat-sink backing and active cooling keep the output consistent through back-to-back sessions — which is exactly what a resort spa or recovery studio needs.
It is the flagship of the Marcus Bath red light range, and it pairs naturally with our sauna rooms and wider light therapy collection when you're building a complete wellness suite. Designed, delivered and installed across India by our own team — the same team that has been building luxury wellness since 2003.
Every Part, Engineered on Purpose
A closer look at what goes into the MB-RL01 — from the dual-wavelength canopy to the cooling system that keeps it running all day.
Technical Detail
Full specification of the MB-RL01. Exact figures are confirmed on your quote and may vary by configuration.
| Light & Performance | |
|---|---|
| Wavelengths | 660nm deep red + 850nm near-infrared (dual-chip LED) |
| LED count | 18,000 – 26,000 LEDs (configuration dependent) |
| Irradiance | Up to 140 mW/cm² at treatment surface |
| Coverage | Upper canopy + lower bed — full body, single session |
| Session time | 10 – 20 minutes |
| UV emission | None |
| EMF | Low EMF at treatment distance |
| Power & Controls | |
| Power supply | 220–240V AC, 50Hz (standard Indian mains) |
| Power draw | Approx. 3.5 – 5 kW at full output |
| Controls | Digital touch panel, preset programmes, session timer, emergency stop |
| Comfort features | Integrated cooling fans, Bluetooth audio, contoured acrylic surface |
| Build & Durability | |
| Chassis | Powder-coated steel with reinforced hinge assembly |
| LED lifespan | Approx. 50,000 hours (10+ years typical residential use) |
| Cooling | Aluminium heat-sink backing with active fan cooling |
| Serviceability | Individual LED modules and drivers replaceable in place |
| User capacity | Up to 180 kg; custom lengths available for taller users |
| Included | |
| Delivery & install | Site survey, delivery, on-site installation & electrical commissioning |
| With every unit | Protective eyewear, user training, manufacturer warranty, nationwide support |
Space & Sizing
Plan your room with confidence. Custom sizing is available on request.
What the Light Does
Skin Wellness
660nm deep red light is commonly used to support skin tone, texture and a naturally healthy appearance.
Muscle Recovery
850nm near-infrared reaches deeper tissue — widely used by athletes around training and recovery.
Relaxation
Warm, screen-free red light has become a popular part of evening wind-down routines.
Safe & Non-Invasive
No UV, no heat damage — 10–20 minute sessions with medical-grade, low-EMF LEDs.
Red light therapy is a wellness practice, not a medical treatment. Marcus Bath makes no medical claims. Please consult a qualified physician regarding any health condition.
MB-RL01, Answered
Because the bed surrounds the body with light from both the upper canopy and the lower bed at once, a full-body session takes just 10 to 20 minutes. There's no need to reposition between areas — one session covers the whole body.
The MB-RL01 starts at ₹12,50,000. Final pricing depends on LED configuration, any custom sizing, and installation requirements at your site, so every quote is prepared individually. Request a quote above and our team will send exact pricing.
The unit itself is roughly 2200 × 1000 mm. We recommend a minimum room size of 3.0 × 2.4 m for comfortable entry and exit, with about 1500 mm of clearance above the unit for the canopy to open fully. Our team confirms everything during the site survey.
Yes. The MB-RL01 is built for commercial duty cycles — back-to-back sessions all day — with a powder-coated steel chassis, aluminium heat-sink cooling, and medical-grade LEDs rated to approximately 50,000 hours. Individual LED modules and drivers can be replaced in place, so servicing is straightforward.
Yes. Marcus Bath delivers and installs the MB-RL01 across India, including Delhi NCR, Mumbai, Bangalore, Goa, Hyderabad, Pune and Chennai. Installation, electrical commissioning and user training are handled by our own team.
Red light therapy uses only red and near-infrared wavelengths — there is no UV, no tanning effect and no skin damage. The MB-RL01 uses medical-grade, low-EMF LED arrays, and protective eyewear is supplied. It is a wellness practice, not a medical treatment; please consult a physician regarding any health condition.
Explore the Full Range
Five formats of red light therapy — from compact panels to full 360° rooms.
360° Therapy Room
A walk-in chamber with LED arrays on every surface — the centrepiece of a wellness suite.
Full-Body Panel
A tall LED array on a floor stand — professional light therapy at home, no install work.
Targeted Panel
A compact panel for focused sessions — face, back, joints. The entry point into red light.
Sauna + Red Light
Heat therapy and light therapy engineered into a single custom timber cabin.
Bring the MB-RL01 Home
Tell us about your space and we'll come back with a specification and an exact price. No obligation.
MB-RL01 Therapy Bed
Share a few details and our team will send you an exact price.